Loading bay safety: how to stop drive-aways and vehicle creep

Part of our workplace transport guide: step 3 of 7

Download the bay release checklist (Word) (DOCX · 38 KB) · Download the bay release checklist (PDF) (PDF · 29 KB)

What does HSE say about loading bays?

HSE's guide to workplace transport safety (HSG136) treats a loading bay as part of the traffic route (paragraph 38), so the general duty applies there too. Regulation 17 of the Workplace (Health, Safety and Welfare) Regulations 1992 says: "Every workplace shall be organised in such a way that pedestrians and vehicles can circulate in a safe manner."

On loading specifically, HSG136 paragraph 133 says: "Vehicles should be prevented from moving while they are being loaded or unloaded." It names the two failures:

"'driveaway' incidents, when the driver of a vehicle being loaded drives off from the loading bay unexpectedly. These can have serious consequences, especially if lift trucks are involved;"

"'creep' incidents, when gaps are created between the loading bay and the vehicle, caused by equipment such as lift trucks moving between the loading bay and the vehicle."

HSE's loading factsheet puts it plainly: "There must be safeguards against drivers accidentally driving away too early. This does happen, and is extremely dangerous."

The controls, and how each one fails

HSG136 paragraph 134 lists the main options: vehicle or trailer restraints such as wheel chocks; traffic lights, barriers or other stop signals; systems that control access to the keys or the cab; and a safe system of work so the driver knows when it is safe to leave. It also mentions vehicle features such as four-wheel braking and cab alarms.

Control Who operates it How it fails What to check
Vehicle or trailer restraint (site-based) Bay team Not engaged; damaged; a powerful vehicle can pull it from its fixings Engaged on every load; function checked; damage reported
Vehicle-based systems (on the trailer) Haulier Relies on the haulier's maintenance, which the site doesn't control Agree with hauliers; don't rely on it alone
Wheel chocks Driver or bay team Not placed, placed loosely, or the person placing them stands in a dangerous spot Large, brightly coloured chocks; a rule for who places them and when
Traffic lights at the door Bay team and driver A light doesn't physically stop a vehicle Pair lights with a barrier, a restraint or a key rule
Barrier Bay team Left open; bypassed Interlocked with the door or the leveller where possible
Keys or paperwork held Goods-in Spare keys; paperwork handed back early One named role holds them; a log
Safe system of work Everyone Drifts on busy shifts Written down, briefed, and checked on nights

HSE's site-based systems page makes two points worth putting in front of anyone choosing between these. First: "Systems that rely on people's actions are less reliable than engineered solutions." Second, on chocks: "A safe system of work covering the use of wheel chocks is important, as workers who put them in place or remove them will be in a dangerous place." It also notes that the driver should move off only on a signal from a designated person, and that key safes are cheap and often used alongside lights.

The simplest procedural control is in HSE's factsheet: "The person in charge of loading or unloading could keep hold of the vehicle keys or paperwork until it is safe for the vehicle to be moved."

The bay itself

HSG136 paragraphs 127 to 132 cover the area around the dock:

Where should the driver be?

HSG136 paragraph 127 asks sites to provide a safe area for drivers to wait, with facilities. If a driver needs to watch the loading, it should be from a clearly marked safe position (paragraph 128). Our guide to visiting drivers at warehouses and distribution centres covers what to tell them on arrival.

A worked example (invented)

This example is invented to show the method. It is not a real site.

A distribution centre has 12 dock doors. Ten have vehicle restraints; two older doors don't. The site relies on drivers staying in their cabs until the bay team waves them off. One night a shunter driver, told a trailer is ready, pulls it while a forklift is still inside. Nobody is hurt.

Question Finding
Who decided the trailer could leave? Nobody in particular. The shunter driver was told by radio.
Were restraints in use? Yes on that door, but the bay team released it early to save time.
What changed after review? Keys and the shunter's job card are held at goods-in until a named person signs the release. Each door has a red/green light linked to the restraint. The two older doors get chocks with a placing rule and a priority for restraints in next year's budget.
How will we check? Compare the bay release log with gate-out times weekly. Function-check restraints monthly.

Real cases

HSE's press releases show how loading goes wrong when people and lift trucks share the space:

Use this: a bay release checklist

Download the bay release checklist (Word) · PDF. Free, no sign-up.

It follows one sequence at every door: vehicle on bay, restraint or chocks on, keys or paperwork held, leveller in place, loading complete, area clear, restraint off, driver signalled. Each step has a signature. The second page is the "which control fits" table above, to use when you review your bays.

Common questions

What is vehicle creep at a loading bay?

Creep is when a trailer gradually moves away from the dock as lift trucks drive on and off it, opening a gap between the dock and the trailer. HSE's guide to workplace transport (HSG136, paragraph 133) names it as one of the two main loading bay failures, alongside drive-aways.

What is a drive-away, and how do you prevent one?

A drive-away is when the driver pulls off the bay while loading is still going on. HSE's options include vehicle restraints or chocks, lights or barriers, holding the keys or paperwork, and a safe system of work so the driver knows when it is safe to leave (HSG136, paragraph 134). Many sites use two together, such as a restraint linked to a light.

Are wheel chocks a legal requirement in the UK?

No single control is required by law. HSG136 lists chocks as one option among several. The legal duty is to organise the workplace so that people and vehicles can circulate safely, and to control the risk so far as is reasonably practicable (Workplace Regulations 1992, regulation 17; Health and Safety at Work etc. Act 1974, section 2). Your risk assessment decides which controls you need.

Should lorry drivers stay in the cab during loading?

Not necessarily. HSE's guidance on delivering safely says it is often unrealistic, and sometimes unsafe, to expect drivers to stay in the cab throughout. Give them a safe waiting area, or a marked safe position if they need to watch (HSG136, paragraphs 127 to 128).

Do traffic lights stop drive-aways on their own?

No. A light tells the driver when to go, but it doesn't physically stop the vehicle. HSE suggests pairing lights with a barrier, a restraint, or a safe system such as holding the keys.

Who is responsible at the loading bay, the site or the haulier?

Both have duties and must co-operate (Management Regulations 1999, regulation 11). In practice the site controls the bay, sets the release rule and tells drivers about it on arrival. The haulier briefs its drivers and maintains its vehicles.

Sources

Who decides when a lorry can leave your bays, and how would you know if that rule was being followed on nights? Safety Mapping: a free two-week trial on one camera.

Last reviewed November 2026

All guides