Part of our workplace transport guide: step 2 of 7
Download the reversing walk-check (Word) (DOCX · 37 KB) · Download the reversing walk-check (PDF) (PDF · 23 KB)
HSE's guide to workplace transport safety (HSG136) starts with removing the need to reverse. A one-way system is one of the best ways to reduce reversing; if one isn't possible, HSE suggests drive-through loading and parking areas, and turning areas so vehicles can drive forwards most of the time (HSG136, paragraphs 90–91).
If reversing can't be avoided, HSG136 paragraph 92 lists the next measures: dedicated, clearly marked reversing areas; making reversing areas larger to improve visibility; excluding non-essential people; fixed mirrors or other visibility aids; reversing aids on vehicles such as CCTV and sensors; and a trained banksman (signaller), "but only when all other options have been exhausted."
On banksmen, HSE is direct: "Banksmen should only be used when there is no other way to control reversing risks." (HSG136, paragraph 94). The lift truck code says the same: "You should only consider using a banksman (also known as a signaller) when there is no other way to control reversing risks." (L117, paragraph 123)
1. Remove the reversing. A one-way system, clockwise around the site unless there are reasons why that would not be safer (HSG136, paragraph 44). Drive-through loading and parking. Turning areas: a roundabout or "banjo" is best; "hammerhead" and "stub" layouts also work (HSG136, paragraph 91). Where you need reverse parking, HSE suggests angled bays so fewer vehicles reverse into the traffic flow (HSG136, paragraph 101).
2. Make the reversing areas safe. Mark them clearly for drivers and pedestrians. Make them big enough to see. Keep everyone out who doesn't need to be there (HSG136, paragraph 92).
3. Help people see. Fixed mirrors in the workplace, and visibility aids on vehicles (HSG136, paragraph 92).
4. Reversing aids on vehicles. CCTV and reversing sensors (HSG136, paragraphs 224–228).
5. A banksman, last. If you use one, they must be trained and competent, use agreed signals, be visible to the driver at all times, and stand in a safe position. If the driver loses sight of the banksman, the driver should stop immediately (HSG136, paragraphs 94–97).
Where vehicles reverse up to loading docks, walls or edges, HSE suggests barriers, buffers, bollards or wheel stops that are highly visible, sensibly positioned and able to stop a vehicle at low speed, plus lines or guide rails on the floor to help position the vehicle (HSG136, paragraph 93).
HSG136 lists the limits of CCTV on vehicles: drivers have to check the screen and react; lenses need regular cleaning and can be affected by bright sun or reflections; heights and distances are hard to judge on a monitor; the camera may not cover every blind spot; and drivers can come to rely on it too much (paragraph 226). Reversing alarms can be drowned out by other noise, ignored on a busy site where they're constant, or hard to locate (paragraph 228). Sensing systems need testing regularly (paragraph 227).
None of that makes them worthless. It means they belong after removing and separating, not instead of them, and they go on the daily vehicle check.
This example is invented to show the method. It is not a real site.
A regional distribution centre has 14 loading doors on one side of the building. Trailers arrive through a single gate, turn in the yard and reverse onto the doors. A shunter moves empty trailers to a drop area at the back. Drivers and shunter drivers walk across the yard to the gatehouse.
| Hazard | Who | Controls in place | Added after review | How we'll check |
|---|---|---|---|---|
| People struck by trailers reversing onto doors | Drivers on foot, shunter drivers, yard staff | Reversing alarms; drivers told to stay in cab | Marked reversing zone in front of the doors with a no-pedestrian rule; barriered walkway from the drivers' parking to the gatehouse; drivers' viewing point by door 1 | Count people inside the reversing zone in a busy hour, monthly |
| Shunter reversing in the drop area | Yard staff, visiting drivers | Shunter CCTV | Drop area made one-way with a turning loop so the shunter drives forwards to drop; fixed mirror at the blind corner | Watch three shunter moves per shift for a week |
| Trailers hitting the dock | Dock staff | Dock bumpers | Floor guide lines; wheel stops checked monthly for damage | Damage log on the monthly check |
Both the site and the haulier. Site operators should co-operate with the employers of visiting drivers (HSG136, paragraph 126), and those in control of sites where unloading takes place must ensure it is carried out safely (paragraph 121). In practice the site sets the reversing rules, and tells drivers about them on arrival (HSG136, paragraph 125).
Download the reversing walk-check (Word) · PDF. Free, no sign-up.
Only if there is no other way to control the risk. HSE says banksmen "should only be used when there is no other way to control reversing risks" (HSG136, paragraph 94). Look first at removing reversing, reversing areas, keeping people out, mirrors and vehicle aids.
Usually not on their own. HSE lists their limits: drivers must check them and react, lenses need cleaning, distances are hard to judge, and they may not cover every blind spot (HSG136, paragraph 226). Use them alongside removing reversing and keeping people out of reversing areas.
Both the site and the driver's employer have duties, and they should co-operate (HSG136, paragraphs 125–126). The site must also make sure unloading on its premises is done safely (paragraph 121). In practice the site sets the reversing rules and tells drivers on arrival.
Often, in part. Even where a full loop isn't possible, a turning area (a banjo, hammerhead or stub) can let vehicles drive forwards most of the time (HSG136, paragraph 91).
How many reversing moves happen in your yard in a busy hour, and how many with someone on foot nearby? Safety Mapping: a free two-week trial on one camera.
Last reviewed November 2026