Contractors and vehicles on your site: who is responsible, and what to agree first

Part of our workplace transport guide: step 4 of 7

Download the contractor briefing sheet (Word) (DOCX · 38 KB) · Download the contractor briefing sheet (PDF) (PDF · 23 KB)

Who is responsible when a contractor is on your site?

Both of you. HSE's brief guide Using contractors (INDG368) defines a contractor as "anyone you ask to do work for you who is not an employee", and says: "Both you and the contractor you use have responsibilities under health and safety law."

The law behind that:

HSE's guide to workplace transport (HSG136) asks you to "Make sure responsibilities for health and safety management are clearly allocated before any work starts so that all employees, contractors, subcontractors, visiting drivers, maintenance staff and other workers understand what they need to do to maintain a safe workplace."

Choosing and checking a contractor

INDG368: "You will need to satisfy yourself that the contractor you choose can do the job safely and without risks to health." How far you go depends on the job: "the level of enquiries you make should be determined by the level of risks and the complexity of the job."

HSG136 adds: "When you engage contractors or agency workers, you should establish their competence before they do any work." And: "The same health and safety standards that apply to permanent employees also apply to agency workers and contractors."

For work near vehicles, useful things to ask include: who will supervise their team, their risk assessment for similar work, training records for anyone who will drive or operate plant, and their recent safety record. If they'll bring their own vehicles or plant, our guide to who may drive what on your site covers checking their operators.

Before they arrive: assess and agree

INDG368: "Make sure your assessment covers risks to contractors from your business (eg asbestos, on-site vehicles)." Then: "The contractor must assess the risks for the contracted work and then both of you must get together to consider any risks from each other’s work that could affect the health and safety of the workforce or anyone else."

Tell them what they need to know. HSG136's list includes "the routes to be used; the vehicles and equipment on site;" and "other people on site, such as other contractors or visiting drivers."

Agree it, and write it down:

And don't rely on common sense. INDG368: "Don’t assume that contractors will be aware of all risks, even if they seem obvious to you." A reach truck reversing out of an aisle is obvious to your team. It may not be to someone servicing the lighting.

On the day

When the plan changes mid-job

A change during the job is a risky moment: a new work area, a moved route, a closed crossing. Every contractor and every driver needs to know at once, not at the next briefing. Treat it like a small version of a layout change; see changing a site layout.

Checking during and after

INDG368 suggests "regular checks – ask yourself ‘are the control measures working?’" Walk the area, especially at the start of each day and after any change. At the end of the job, ask what went well and what you'd change next time.

HSE's own examples

INDG368 gives two examples involving vehicles:

A worked example (invented)

This example is invented to show the method. It is not a real site.

A distribution centre books a contractor to resurface part of its yard over a weekend, while weekend deliveries continue.

Step What they did
Before Compared risk assessments; agreed the coned work area, the dumper and roller routes, and where HGVs would turn instead
Briefing Walked the contractor's supervisor along their route; marked on the site plan where delivery traffic crosses it
On the day Gatehouse told every arriving driver about the changed turning area; one named shift manager in charge of the contractor
Change On Sunday afternoon the contractor moved to a second area. The shift manager re-briefed the contractor's team, the gatehouse and the yard shunter before work restarted
After Monday's first shift briefed on the new surface and markings; a short review with the contractor

Real case

In June 2026, a joint venture working on HS2 was fined £400,000 after a contracted haulier's 20-tonne tipper truck fell about two metres off the edge of an excavation ramp, injuring the driver. HSE's press release says the earthworks team had changed its working area that morning, creating a new traffic route but leaving an unprotected edge, and there were no signs on the haul routes. This was a construction site, but the lesson applies anywhere: when the plan changes, the people driving need to know. (HSE press release)

Use this: a contractor vehicle-risk briefing sheet

Download the briefing sheet (Word) · PDF. Free, no sign-up.

One page: the contractor, the job and dates; your contact and who supervises them; the routes in and out (with space to sketch); your vehicles moving nearby and when; other contractors and visiting drivers; the agreed controls; who can stop the work and how; a log of re-briefings when things change; and signatures.

Common questions

Who is responsible for a contractor's safety on my site?

Both of you. The contractor is responsible for its own work and workers. You're responsible for the risks your site creates for them, including your vehicles, and for co-operating and sharing information. HSE's guidance is to agree the controls together before work starts.

What should a contractor induction cover for vehicles?

The routes they'll use, where your vehicles move and when, crossings and reversing areas, other contractors and visiting drivers on site, the site rules, who supervises them, how to report a problem, and who can stop the work. Walking the route with them is better than a briefing in an office.

Do contractors have to follow my site rules?

Agree the rules with them before work starts, in writing. HSE's guidance says the site operator and contractors should agree the safety arrangements before starting, and that contractors should be fully aware of any penalties if they don't follow safe working practices.

Who is responsible if a contractor's vehicle injures one of my employees?

More than one party can have duties. You have a duty to your own employees, the contractor has a duty to people affected by its work, and both of you must co-operate where you share a workplace. Agreeing routes and controls in advance is how you stop it happening.

Do the CDM Regulations apply to contractors on my site?

Where the contractor is doing construction work, such as building, groundworks or major resurfacing, the Construction (Design and Management) Regulations 2015 apply to that work. HSE's construction pages explain the duties. This guide covers contractors working on an operating site.

Sources

When a contractor is in your yard, do you know where they walk while your vehicles are moving? Safety Mapping: a free two-week trial on one camera.

Last reviewed November 2026

All guides