Part of our workplace transport guide: step 4 of 7
Download the handover sheet (Word) (DOCX · 38 KB) · Download the handover sheet (PDF) (PDF · 27 KB)
HSE's guidance on shift handover sets out three elements. The outgoing shift prepares what needs to be passed on. The two shifts exchange it, ideally face to face, two-way, and both verbally and in writing. Then comes "cross-checking of information by in-coming personnel as they assume responsibility for the task". HSE also asks for enough time, for the handover to be based on what the incoming team needs, and for higher-risk handovers to be identified in advance.
HSE notes: "Many accidents have occurred because of failure of communication at shift handover, the majority of these involved planned maintenance work." Its own examples, such as Piper Alpha, come from major hazard industries, but the same failure happens in a yard: a barrier moved, a crossing closed, a truck taken out of service, and the next shift not told.
HSE's guide to human factors, Reducing error and influencing behaviour (HSG48), lists what goes wrong: information that is missing, unnecessary, inaccurate or unclear; misunderstandings; and "failing to carry forward information over successive shifts." It explains why: "Miscommunications and misunderstandings are most likely to occur when the parties communicating have a different understanding of the current state of the process." And it asks employers to "allow sufficient time for communication particularly at shift handover;".
HSE's guide to managing health and safety (HSG65) adds supervision: "Recognise that differing levels of supervision may be needed at certain times, for example during shift changeover or where there are young or inexperienced workers."
HSE's guidance doesn't give a vehicle-specific list. This is our suggested list, built on its principles. Cover each item, even if the answer is "no change".
HSG48 identifies handovers with higher risk. On a vehicle site, these include:
HSG48 also describes handovers being disrupted by other handovers happening nearby. A busy goods-in office at 6 am is a good example. Find a quieter spot if you can.
This example is invented to show the method. It is not a real site.
On the day shift, a contractor starts installing new racking near the canteen. The site closes the usual pedestrian crossing and puts up a temporary barrier. The day supervisor writes "racking work ongoing" in the log. The night supervisor reads it but doesn't know the crossing has moved. At 2 am, a picker walks the old route to the canteen and meets a reach truck at the barrier.
| Question | Finding |
|---|---|
| Was the change written down? | Partly. The log mentioned the work, not the crossing. |
| Was it talked through? | No. The supervisors overlapped by two minutes. |
| Did the incoming shift check? | No. Nothing prompted them to walk the area. |
| What changed after review? | "Route changes" is now the first line of the handover sheet. Any changed route is walked by the incoming supervisor. Overlap extended to 15 minutes. |
| How will we check? | Once a month, ask the incoming supervisor to name today's changes before they read the sheet. |
HSE's press releases rarely name handover as the failure, so we use a related case honestly. In October 2026, a company was fined £80,000 after a worker on a ride-on pallet truck collided with a forklift. Routes had been changed during a machinery installation, two types of vehicle ended up sharing a busy loading area with poor visibility, and HSE found the change had not been risk assessed. (HSE press release) Temporary changes like this one need assessing, and then passing on at every handover until they end.
Download the handover sheet (Word) · PDF. Free, no sign-up.
It follows HSE's three parts. The outgoing shift fills in the list above. The two supervisors talk it through and the incoming one reads back the top three items. The incoming supervisor walks any changed route and signs. There is a tick box for higher-risk handovers.
Anything the incoming shift needs to work safely: route or crossing changes, vehicles out of service, equipment defects, who is on site, deliveries due, near misses, weather and lighting, and new people. HSE's guidance asks for handover to be based on what the incoming team needs.
Because information is easily lost between shifts. HSE's guidance on human factors calls handovers "a particularly vulnerable time for communication failures", and HSE notes many accidents have followed a failure of communication at handover.
In HSE's guidance: the outgoing shift prepares, the two shifts communicate, and the incoming shift cross-checks the information as it takes over.
Both. HSE recommends handover that is face to face and two-way, supported by a written record. Writing alone misses questions; talking alone is forgotten.
Long enough to be two-way. HSE asks employers to allow sufficient time, especially at shift change. There is no fixed figure; it depends on what has changed. Plan an overlap rather than relying on the last few minutes.
A written record of what was passed on, by whom, and when. It helps the incoming shift, and it shows later what was known at each change. It works best alongside a conversation, not instead of one.
What changed on your site today that the night shift might not know about? Safety Mapping: a free two-week trial on one camera.
Last reviewed November 2026