Part of our workplace transport guide: step 2 of 7
Download the lone working check (Word) (DOCX · 38 KB) · Download the lone working check (PDF) (PDF · 25 KB)
Yes, if the risks have been assessed and controlled first. HSE's page for employers says: "As an employer, you must manage any health and safety risks before people can work alone."
HSE's guide Protecting lone workers (INDG73) defines a lone worker as "someone who works by themselves without close or direct supervision". That includes people who "work separately from other people on the same premises or outside normal working hours, for example security staff, cleaners, maintenance and repair staff;".
You don't need a separate document. INDG73 says: "There is no legal requirement to conduct a specific, separate risk assessment for lone workers. However, you have a duty to include risks to lone workers in your general risk assessment and take steps to avoid or control risks where necessary."
INDG73 explains the core of it: "Lone workers face the same hazards at work as anyone else, but there is a greater risk of these hazards causing harm as they may not have anyone to help or support them if things go wrong."
In a yard at night:
HSG136 names lone workers among those who "may have particular requirements" when you assess workplace transport risks.
INDG73 suggests questions to ask. Three are especially relevant in a yard:
Add the vehicle questions: which vehicles move while someone is alone on foot, where they cross, how well those places are lit, and what happens if the lone worker is hit or trapped. INDG73 asks you to "take account of normal work and foreseeable emergencies such as fire, equipment failure, illness and accidents."
Limits on what can be done alone. INDG73: "You should set the limits to what can and cannot be done while working alone." It adds: "There are some high-risk activities where at least one other person may need to be present." Examples a yard might choose (ours, not HSE's): no shunting or coupling while someone is on foot alone in the yard; nobody climbs onto a trailer alone; no forklift work with only one person on site.
Supervision that fits the risk. "The level of supervision needed is a management decision, which should be based on the findings of a risk assessment – the higher the risk, the greater the level of supervision required." HSE also suggests new starters may need to be accompanied at first.
Check-ins. INDG73 lists "pre-agreed intervals of regular contact between the lone worker and employer, using phones, radios, email etc, bearing in mind the worker’s understanding of English;". Agree who answers, and what happens when a check-in is missed.
A way to raise the alarm. A radio, a phone, or a lone worker alarm (manual or automatic), that works in every part of the yard.
Confirmation that they've left. INDG73: "implementing a robust system to ensure a lone worker has returned to their base or home once their work is completed."
Lighting. The Workplace Regulations say: "Every workplace shall have suitable and sufficient lighting." (regulation 8) Check routes, crossings and coupling areas at night, not by day.
INDG73 also notes that some employers use dynamic risk assessment, where workers decide on the spot. It is clear that "This is not a substitute for a comprehensive risk assessment."
Only if someone is watching it, at that moment, and knows what to do. A camera that records for later won't bring help. If your plan relies on CCTV, write down who watches, when, and how they respond. If nobody does, the plan needs a check-in or an alarm instead.
INDG73: "Emergency procedures should be established, put in place and employees should be trained in them." And: "You should regularly test technical solutions and all emergency procedures to ensure lone workers can be reached or contacted if a problem or emergency is identified."
A simple test is a dummy missed check-in. Does anyone notice? How long does it take? Who goes, and do they go with someone? Our guide to a vehicle incident in the yard covers the first hour if something does happen.
This example is invented to show the method. It is not a real site.
A cross-dock has one security guard overnight, who also directs two late arrivals to their bays. A shunter works until 2 am.
| Question | Finding | Control |
|---|---|---|
| Who is alone, and when? | Guard all night; shunter alone in the cab | Both on the night list |
| What moves while someone is on foot? | Shunter moves trailers while the guard walks the yard | Shunter parks and radios before the guard walks; guard walks only on the marked route |
| Lighting | Two coupling areas poorly lit | Lights added; checked monthly after dark |
| Check-ins | None | Hourly radio check with the night manager at the sister site |
| Missed check-in | Not planned | Night manager calls twice, then calls the on-call manager and the police; nobody enters the yard alone |
| Tested? | Never | Dummy missed check-in once a month |
We haven't found a recent HSE case of a lone night worker struck by a vehicle in a yard. These two cases show the lone-working gaps that matter in one: no way to call for help, and a two-person rule that wasn't followed.
Download the lone working check (Word) · PDF. Free, no sign-up.
One page: who works alone and when, what vehicles move then, tasks not allowed alone, lighting, the check-in interval and who answers, the alarm and the response, how you confirm people have left, what happens after a missed check-in, and when it was last tested.
Yes. There's no general ban on working alone, at night or otherwise. HSE says employers must manage the health and safety risks before people work alone. Some tasks may need at least one other person present; your risk assessment decides which.
No. HSE's guidance says there's no legal requirement for a separate one, but lone working must be included in your general risk assessment, with steps to avoid or control the risks.
HSE doesn't set a fixed interval. It asks for "pre-agreed intervals of regular contact". Set the interval from your risk assessment: the higher the risk, the shorter the gap. Decide in advance what happens when a check-in is missed.
Not on its own. CCTV only helps if someone is watching live and has a plan to respond. If nobody is watching, use check-ins or a lone worker alarm as well.
It can be done safely if the risk assessment covers it. Keep the guard on marked walking routes, agree how drivers and the guard warn each other, light the areas where they meet, set check-ins, and decide which tasks the guard doesn't do alone.
Who works alone, when and where; the tasks involved; what vehicles and equipment are in use; lighting; how they communicate and raise the alarm; foreseeable emergencies; any tasks not allowed alone; the supervision needed; and how the arrangements are tested.
Do you know how vehicles and people share your yard when only one or two people are on site? Safety Mapping: a free two-week trial on one camera.
Last reviewed November 2026