Safe system of work for loading and unloading: what to write, with a template

Part of our workplace transport guide: step 3 of 7

Download the safe system of work template (Word) (DOCX · 38 KB) · Download the safe system of work template (PDF) (PDF · 29 KB)

What is a safe system of work?

A safe system of work is a planned, written way of doing a task so the risks are controlled. The duty comes from the Health and Safety at Work etc. Act 1974, which includes among an employer's duties "the provision and maintenance of plant and systems of work that are, so far as is reasonably practicable, safe and without risks to health" (section 2(2)(a)). Your risk assessment comes first; the safe system of work turns its controls into steps people follow.

A useful way to structure one is in three parts: the physical controls (the bay, restraints, barriers), the procedure (the steps and their order), and the people (who is trained, who is in charge, who can stop the job).

Loading needs one in writing because several companies' people are involved and the risks are serious. HSG136 notes: "Falls from vehicles are very common and account for around a third of all workplace transport injuries, many while loading and unloading." (paragraph 172)

Who is responsible for loading and unloading?

HSG136 is clear that "drivers are not the only people responsible for the safety of the vehicle and the load." (paragraph 121) In outline:

Where two companies' people work on the same vehicle, HSG136 says: "Both employers are responsible for the safety of their own employees and those of other companies." and "Those involved in managing this work should agree, preferably in writing, the safety arrangements before work starts." (paragraph 36) The Management Regulations add duties to co-operate, co-ordinate and share information "Where two or more employers share a workplace (whether on a temporary or a permanent basis)" (regulation 11).

HSE's advice is to start early: "Where possible, agree safety arrangements when the order is placed. These should be confirmed in writing, making it clear who has responsibility for what during loading and unloading." (paragraph 120) Its web guidance on loading adds: "Hauliers and recipients will need to exchange information about loads in advance so that they can agree safe unloading procedures." And for the sender: "Loading should allow for safe unloading."

What to put in it

HSG136 asks employers and site operators to make sure "there is a safe system of work for deliveries and collections;" and that "instructions (in writing) are provided for all those involved." (paragraph 123) These nine sections cover what to include. The template follows the same order.

1. Scope and roles. Which bays, yards and vehicle types it covers, and who: your staff, agency workers, visiting drivers, hauliers. Name the role in charge of each vehicle movement.

2. Before arrival. Load information exchanged, arrangements agreed in writing, vehicle size limits and delivery times sent to the haulier.

3. On arrival. Where drivers report, how they get the site rules and map, PPE, and where they wait.

4. Securing the vehicle. HSG136: "Vehicles should be prevented from moving while they are being loaded or unloaded." (paragraph 133) Say which method you use (restraint, chocks, lights, keys or paperwork held), who applies and releases it, and how the driver is told it's clear. HSE's list of measures includes "safe systems of work to make sure the driver knows when it is safe to leave;" (paragraph 134). HSE's loading guidance suggests: "The person in charge of loading or unloading could keep hold of the vehicle keys or paperwork until it is safe for the vehicle to be moved."

5. The load. HSE: "Checks must be made before unloading to make sure loads have not shifted during transit, and are not likely to move or fall when restraints are removed." Say what happens if it has: HSG136 says "Every driver needs to know how to deal with a load that has moved into an unsafe position." (paragraph 151) In outline, stop, keep the vehicle where it is, and let a competent person decide how to unload it. Don't open a curtain that is bulging.

6. Working at height. How people get onto and off the load bed, and where they stand, or a rule that nobody goes on the load bed.

7. People and the exclusion zone. Who may be in the loading area, and where the driver waits. HSG136: "Where drivers need to observe the loading, this should be from a clearly marked, safe position, for example away from moving vehicles, or places where loads could fall." (paragraph 128) HSE's general guidance is that "Drivers should not remain in their cabs if this can be avoided.", with a safe place to wait instead. Some sites set a different rule after assessing their own bays; whichever you choose, write it down and tell drivers before they arrive.

8. Stopping the job. HSG136: "Drivers (including agency staff) should be made aware that they are authorised to refuse or stop loading or unloading for safety reasons." (paragraph 122) Extend that to everyone, and say who to call.

9. Checks and review. How often a supervisor watches the job, how near misses are reported, and what triggers a review: an incident, a layout change, a new vehicle type or a change of haulier arrangements.

Writing it so people use it

Checking it works

A written system is only useful if it matches what happens. HSG136: "Even experienced people should be monitored to make sure they are working in accordance with both the training they have received and any safe systems of work." (paragraph 249)

Our essay on work as imagined and work as done explores why the written and the real versions drift apart.

A worked example (invented)

This example is invented to show the method. It is not a real site.

A food distribution centre receives deliveries from six regular hauliers and a few one-off carriers. Its old procedure is a paragraph in the site rules. Using the template, the transport manager writes a two-page safe system of work for its dock doors.

Section What they wrote
Roles The goods-in supervisor is in charge of every vehicle movement at the doors.
Before arrival Load details and the safe system of work go out with every booking confirmation. Regular hauliers sign it once.
Securing the vehicle Restraint on, keys handed to goods-in, light to red. Keys come back only when the supervisor has checked the area is clear.
The load Curtains are opened by the driver from the side, only after a visual check. A bulging curtain means stop and call the supervisor.
Driver position Drivers wait in the drivers' room, which has a window onto the doors.
Checks The shift manager watches two unloads a week, one on nights.

Real cases

Use this: a safe system of work template

Download the template (Word) · PDF. Free, no sign-up.

It follows the nine sections above, with prompts and space to write. Use one per bay type or loading area, and attach it to booking confirmations for regular hauliers.

Common questions

What is a safe system of work for loading and unloading?

A written procedure that sets out how loading and unloading is done safely at your site: who is in charge, how the vehicle is stopped from moving, how the load is checked, where the driver waits, how people stay clear, and who can stop the job. It turns the controls in your risk assessment into steps.

Who is responsible for unloading a lorry: the driver or the site?

Both have duties. HSE's guidance says the site where unloading happens must make sure it is done safely, the haulier must provide suitable vehicles and trained drivers, and "drivers are not the only people responsible for the safety of the vehicle and the load." Agree who does what in writing, ideally when the order is placed.

Can a driver refuse to load or unload?

Yes, for safety reasons. HSG136 says: "Drivers (including agency staff) should be made aware that they are authorised to refuse or stop loading or unloading for safety reasons." Your safe system of work should say so, and say who they tell.

Should lorry drivers stay in their cab during loading?

HSE's general guidance is that "Drivers should not remain in their cabs if this can be avoided.", and that sites should provide a safe place to wait. If drivers need to watch, it should be from a clearly marked safe position. Some sites set a different rule after assessing their own bays. Whatever you decide, write it down and tell drivers before they arrive.

What are the steps in writing a safe system of work?

In general terms: assess the task and its hazards, decide the safe method and the controls, write it as clear steps with named roles, brief and train the people who use it, then watch it in practice and review it when things change.

Should the arrangements be agreed with the haulier in writing?

HSE recommends it. HSG136 says to agree safety arrangements when the order is placed and confirm them in writing, making clear who is responsible for what. Where two companies' people work together, the arrangements should be agreed, preferably in writing, before work starts.

Sources

At your busiest bay, does loading happen the way your written procedure says it does? Safety Mapping: a free two-week trial on one camera.

Last reviewed November 2026

All guides